LABOAO laboratory and medical low temperature vacuum centrifugal concentrator

1. Split design, free combination and collocation, flexible and convenient.
2. Polymethyl methacrylate transparent cover, convenient to monitor the concentration process. Intelligent microprocessor control and simple and straightforward operator interface. Can realize vacuum sample heating (optional), with over-temperature alarm function.
3. Uniform heating method is adopted, the heating speed is fast, the temperature control precision is high, and the cavity can be heated to 60°C.
4. Concentration time: 1min-99h59min, equipped with low-temperature cold trap, the concentration efficiency is greatly improved.
5. Concentration time: 1min-99h59min, equipped with a low-temperature cold trap, the concentration efficiency is greatly improved.
6. The centrifuge chamber is made of alloy aluminum, and the surface treatment process is anodic electrophoresis, which can resist the corrosion of most chemical reagents and solvents.
7. There are many varieties of test tubes (1.5ml, 10ml, 20ml, 50ml, 250ml), which fully meet the needs of experiments.
8. TFT-LCD true color display, dual operation mode of touch screen buttons and physical buttons, simultaneously displaying setting parameters and operating parameters; maintenance-free non-contact drive rotation system.
9. Concentrate at low temperature to avoid sample loss, denaturation, activity loss and oxidation. High-throughput concentration without cross-contamination. The sample did not foam and there was no loss. A safe and easy way to recover solvents from cold traps.

1. Must a vacuum concentrator be used with a vacuum pump and a cold trap?
The vacuum centrifugal concentrator must be equipped with a vacuum pump for vacuuming. If your budget is limited, you can do without a cold trap. A cold trap keeps it cold and speeds up the concentration process.