Stainless Steel Hydraulic Bending Machine Equipment Small CNC Bending Machine Sheet Bending Equipment

1. First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start, so that you can hear the sound of the oil pump turning. (The machine does not work at this time) 2. Stroke adjustment, the use of the bending machine must pay attention to the adjustment of the stroke, and a test run must be performed before bending. When the upper die of the bending machine descends to the bottom, there must be a gap in the plate thickness. Otherwise it will cause damage to the mold and machine. There are also electric quick adjustment and manual stomach adjustment for stroke adjustment. 3. For the selection of the bending notch, generally choose a notch whose width is 8 times the thickness of the plate. To bend a 4mm plate, you need to choose a gap of about 32. 4. There are generally electric quick adjustment and manual fine adjustment for the adjustment of the back gauge, and the method is the same as that of the shearing machine. 5. Press the foot switch to start bending. Bending machines are different from shearing machines. It can be released at any time. When you release your foot, the press brake stops and continues to descend.