Professional design PJLDH15 bowl centrifuge centrifuge

This product absorbs the advantages of similar foreign products from Germany and Russia. All parts that may come into contact with raw materials are made of stainless steel. It can effectively reduce the chemical effect of raw materials and machine spare parts. The power transmission adopts the friction clutch, which transmits the power through the fluid, and the starting is reliable and the rollover is prevented. The machine adopts Swedish SKF grade bearings to ensure the working accuracy of the machine. The separator adopts PLC automatic control system, which can carry out automatic slag cleaning, with stronger adaptability and high degree of automation. The adjustment is convenient, the labor intensity of the workers is opposite, and the solid content ratio in the mixed liquid is wide. During operation, the sealing water 7 rushes into the sealing chamber 6, the sliding piston 4 rises, and the mud discharge hole 3 is closed. Then, the beverage to be treated is fed into the bowl from the feeding pipe 1, and under the action of centrifugal force, solids with higher density are collected on the wall of the bowl, and after a while, the boiling water 7 is flushed into the opening. 5. The sliding piston goes down 4. Open the mud discharge hole 3. The impurities are discharged from the drum. The lighter liquid flows into the channel of the upper distributor along the inner side of the disc, and the lighter liquid is discharged out of the machine by the centrifugal pump 2 . The beverage is therefore well clarified. The separator adopts self-discharging centrifugal pump. Therefore, the machine can work continuously for a long time and obtain a good separation effect for a long time.