Mini Melter for Bitumen Heated Sealant Melting and Dispenser Pour Pot

1. Before the boiler runs, add a proper amount of sealant or liquid asphalt. Don't be afraid to overfill.
2. Reasonably adjust the pressure channel inside the small hand-push concrete pavement joint filling machine. At this time, we can open the valve of the liquefier container and adjust the pressure to the verification state.
3. According to the type of sealant, adjust the temperature indicator to 150-210°C until the melt melts completely.
4. Open the hose locker door to verify ignition.
5. The small hand-push concrete pavement filling machine should confirm whether the temperature of the sealant reaches the specified temperature from the "sealant temperature" thermostat on the upper end of the boiler.
6. Start the engine when the "sealant temperature" thermostat at the upper end of the boiler reaches 100°C.
7. When the temperature of the sealant reaches 150°C, the "stirring valve" can be opened to rotate the agitator.

 

Model	LS-113
Melting kettle volume	113L
size	1635*770*1175mm
net weight	186KG