Concrete pavement engraving machine non-slip engraving slotting machine road electric gasoline embossing machine

Introduction: Mainly used for anti-skid line engraving on cement concrete pavement, wharf, airport, bridge deck, floor slab and expressway. New and old concrete pavement, square, floor, dock anti-skid line engraving machine. This machine is used to engrave anti-skid lines (also called apron lines) on concrete pavement. The carving depth is consistent, the texture is arranged in an orderly manner, and the surface is clear and beautiful. It is a pavement equipment for cutting anti-skid lines on concrete pavements. Not only suitable for new concrete pavement, but also for re-cutting anti-skid lines on old pavement. Parameters: Diameter of engraving piece: 150mm Random installation quantity of engraving piece: 18 Notch spacing (mm) 22 Number of cuts (strips): 18 pieces Host motor model and power: Y132s2-2, 7.5kw Feed motor model and power (travel motor) : Y801-4, 0.55kw Reducer model: WPS70-1 / 50 Dimensions (mm): 1280 * 650 * 880 Rated voltage: 380V Water tank capacity: 46L Total mass (kg): 120