Gas cutting nozzle for portable welding equipment for oxygen and propane gas welding and welding Mapp

American MAPP welding torch

MAPP/propane/butane/liquefied petroleum gas, effectively solve the gas problem of traditional acetylene torches.

Material: Brass
Weight: 800 grams
Size: 28X20X5.5CM

Danger

Extremely flammable gas fire/explosion hazard for use with torches carbon monoxide hazard

This oxygen brazing and cutting torch is different from most handheld torches. It is designed to be used with both oxygen cylinders and Pro Gas or propane cylinders. Using an oxygen cylinder will cause the torch flame to burn at a much higher temperature than without the oxygen cylinder. Do not use this flashlight until you are fully familiar with its proper use and potential hazards. In particular, never attempt to ignite the torch when oxygen is flowing to the torch. Also, when turning off the torch, be sure to turn off the oxygen before turning off the gas. Turning off the gas while oxygen is still flowing may result in flashback and explosion.

Read and follow the instructions and warnings in this manual. Familiarize yourself with the flashlight before lighting and using it. Review instructions and warnings regularly to stay aware. Do not attempt to operate this flashlight without first reading the instructions and becoming fully familiar with its use and potential hazards.

Failure to follow these instructions and warnings could result in property damage, serious personal injury or death.