Garage door remote control switch 433M smart copy remote control electric door access control wireless switch key

Garage door remote control switch 433M smart copy remote control electric door access control wireless switch key

Step 1: Clear the code for the new remote:

1. Press and hold both buttons on the new remote until the lights flash continuously.

2. Release your finger to clear the code successfully

3. After clearing the code, press any key on the remote control once, and the indicator light goes out.

beware!

Do not perform this clearing operation on the original remote control. The light keeps blinking and then releasing instead of just blinking and then releasing. If there is no continuous flashing after a long press, it means that the keys are not pressed at the same time. Please repeat the above steps.

Step 2: Remote copy (clear code before operation)

1. The original remote control in the left hand and the new remote control in the right hand should be placed as close as possible. 2. First press and hold the button of the new remote control, and then press the corresponding button of the old remote control to copy.

3. Release the button after the indicator light flashes quickly, indicating that the copying is successful. Please do the same for other key positions