Hot sale NEMA 14-50 plug to J1772 Type1 EVSE 32A wallbox ev charging station

1.Conform to the provisions and requirements of J1772  IEC61851.

2.High compatibility. It can charge all EVs with Type 1 inlets, correctly and effectively

3.Easy operation. Simply connect the plug with the EV’s inlet, then the charger will automatically detect the connection status and handshaking protocol automatically, and starts charging

4.Switchable currents. Customers can choose an appropriate charging current according to the demand

5.High security. It has passed all tests of TUV. There are all kinds of protective measures to ensure the safety for every user

6.Containing the intelligent chip. It can automatically repair minor charging problems while charging. When a fault occurs, the lights will 7.blink in different ways to indicate different problems.

8.You are able to install the charger indoor or outdoor. Firmly locking the charger on the installation backplane can prevent theft.

9.We are a factory providing OEM/ODM services

1. Firstly, the most important step is to make sure the charger is well connected to the power.
2. Secondly, use the integrated Type 1 charging cable plug to connect the charging station with your electric vehicle.
3. Once the charging cable has clicked in place you are ready to start the charge.
4. Also, there is the option to activate the charging station with RFID cards.
How to stop the charging
1. Firstly, disconnect the Type 2 plug from the electric vehicle’s side when you finish charging.
2. If you wish to manually stop the charging you can do this by pressing the Emergency Button (the red button on the side of the charger) in case of an emergency.
How to check the charging status
1. You can monitor the charging process in real time from the LED screen display.

PRODUCT CARE

• Ensure your charge cable is protected against water and damp to ensure the long life of your cable.
• Ensure that your charging cable is not twisted or excessively tightly bent during cable storage.
• Always store the cable in a dry, clean place. Plug to plug cables should be removed from the charge unit when not in use. This will also protect the charge unit from damp and dust.
• Dust caps should always be replaced when cable is not in use.
• It is advisable to periodically clean the plug pins with a dry, clean cloth. This will remove any damp or dust particles which will cause damage.

1. Don't submerge the ev charging box in water. 2. Don't step on, fold or knot the cable.
3. Don't drop the EV charging box or place a heavy object on it.
4. Don't place the charging cable near high temperature object when charging.
5. Don't operate the EVSE in temperatures beyond its operating range of -25°C to 55°C.
6. Power-supply side input cable should be at least 3*2.5mm (recommended 3*4mm), with a standard 16A scoket. It is suggested that the power distribution is done by the professionals.
7.Don't put fingers into the charging connector when the power plug is still connecting to the power.
8. Don't use this ev charging box when the cable is damaged.
9. The ev charging box is only for ev charging using.
10. Don't use this device with an extension cord or adaptor.

CONTACT US >