Small Solenoid Pinch Valve with Tubings of Various Sizes and Materials

Straight, no-clog flow path

Low power consumption

2-way and 3-way valves supplied with a 30cm-long special tubing

1/16" to 1/8" tubing available

12/24VDCPressure range: 10 to 30 psi

pinch valves have been designed to assure sterility while managing the isolation, diversion, and flow of high purity fluids, blood, or saline in patient applications involving liquid or gas measurements within a fixed instrument. As the flow control component within a transfer site, the  pinch valves enable fast, easy removal and replacement of sterile tubing sets, eliminate the need for disassembly or removal of the valve from the instrument, and isolate fluid contact.

Long life cycle

Each pinch valve is guaranteed to have perfect close pressure when leaving the factory.  Tubings will not stick together even after long time closing as they can promise to be used constantly 300,000 times on and off.

No resistance to flow

The tubing is positioned at the bottom of valve base fixedly even opening one port on the base. On opening condition, the valve produces no resistance to the flow rate.

Many different tube sizes and materials available

The valves are diversified into normally open (NO) valve, normally close (NC) valve and 3 way valve (one tube is NC, one NO), dual 2-way and dual 3-way.  Please contact us if you have special demand including changing tubing material, working pressure and wire top or other replacement.

Other advantage

Easy replacement of tubing for sterile applications

Reliable

No-clog

Tubing Option

We provide wide range of pharmaceutical advanced pinch tubings:

The tubings will not stick together even after a long time closing of valve. The tubing can rebound on time without clog.

Silicone tubing at least 300,000 times on and off

Most valves use the silicone tubing due to its outstanding flexible advantage.

Note:

Tubings of different sizes might aim to different applications. You may contact us for your media and its potency or you may provide your own tubings for us to customize the pinch valve. It is possible that the life span of customized valves is shorter than the standards.