Petrol Engine Rail Profile Grinder
- 2700.00 piece
Registered Supplier
Direct Contact
Inquiry via Message
Product Details
NGM-6.0 Rail Profile Grinder
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Specification
Model | NGM-6.0 |
类型 | Rail Profile Grinder |
Material | Stainless Steel |
Dimensions (L x W x H) (mm) | 1410*500*850mm |
发动机 | 2 stroke petrol engine M165 |
Power | 6.0kW |
Grinding stone speed | ≥3900r/min |
Grinding stone inclination | 0~90° |
Grinding stone feeding stroke | 42mm |
Grinding stone specification | φ150xφ55x70mm |
Fuel tank volume | 4.5L |
Profile wheel span | 1000mm |
Feed adjustment accuracy | 0.125mm |
重量 | 60kg |
More from Wuhan linkage track equipment co.ltd
You May Like
Digital Rail Profile Gauge for Rail Head Wear and Side Cut Measuring
Digital Rail Gauge
Rail Wear Measuring
Digital Track Gauge for Track and Switch Geometry Measuring
Digital Track Gauge
Track Geometry Measuring
Joint Gap Measuring Device Track gauge measurement
Joint Gap Measuring Device
Portable track gauge calibrator Track gauge measurement
portable track gauge calibrator
Mechanical Rail Offset Ruler Track gauge measurement
Mechanical Rail Offset Ruler
Portable Internal Combustion Tamping Machine
Internal Combustion Tamping Machine
Hydraulic petrol engine turnout tamping machine for track turnout tamping work
Hydraulic Rail Turnout Tamping Machine
