Portable Lightweight Abrasive Rail Saw Disc Cutter
- 2650.00 piece
Registered Supplier
Direct Contact
Inquiry via Message
Product Details
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
规范
型 | NQG-5.8 |
类型 | 钢轨切割机 |
材料 | 不锈钢 |
尺寸 （长 x 宽 x 高） （mm） | 850*480*500mm |
Engine | Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW |
Cutting disc form | Double- layer reinforced wire mesh |
Linear speed of cutting disc | 100 m/s |
Rated RPM | ≥4500 r/min |
Specification of cutting disc | φ355xφ25.4 x3.8mm |
Cutting accuracy | Vertical deviation of notch and rail≤0.30mm Deviation of bidirectional cutting interfaces≤0. 35mm |
切割时间 | ≤110s( cut off 60kg/m rail) |
Fuel tank capacity | 1.25 L |
Weight | 22kg |
More from Wuhan linkage track equipment co.ltd
You May Like
Digital Rail Profile Gauge for Rail Head Wear and Side Cut Measuring
Digital Rail Gauge
Rail Wear Measuring
Digital Track Gauge for Track and Switch Geometry Measuring
Digital Track Gauge
Track Geometry Measuring
Joint Gap Measuring Device Track gauge measurement
Joint Gap Measuring Device
Portable track gauge calibrator Track gauge measurement
portable track gauge calibrator
Mechanical Rail Offset Ruler Track gauge measurement
Mechanical Rail Offset Ruler
Portable Internal Combustion Tamping Machine
Internal Combustion Tamping Machine
Hydraulic petrol engine turnout tamping machine for track turnout tamping work
Hydraulic Rail Turnout Tamping Machine
