Rail Laser Versine Alignment Device
- 5000.00 2 - 1000 pieces
PRODUCT DESCRIPTION
Rail Laser Versine Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device .
BENEFITS
1.Quick Installation
The operator can put this device on the track in seconds
2.Saving money in repeat work and accuracy
30m at a time with 99.99% reduction on repeat works and rapid deployment
3. Vernier adjustment knob ensuring accurate readings
The vernier adjustment knob assist the operator to ensure a perfect horizontal position ensuring accurate reading .
4. Stored in a dedicated protective case ,Easy to carry
SPECIFICATION
Laser measure distance | 30m | |
Lser center spot | ﹤10mm（30m distancearea） | |
Point range | horizontal | （-30～+60）mm |
vertical | （-30～+60）mm | |
target positioning device and moving positioning target device resolution | 2mm | |
1 Battery capacity (laser transmitter) | Continuous use for 4 hours | |
Digital Rail Profile Gauge for Rail Head Wear and Side Cut Measuring
Digital Track Gauge for Track and Switch Geometry Measuring
Joint Gap Measuring Device Track gauge measurement
Portable track gauge calibrator Track gauge measurement
Mechanical Rail Offset Ruler Track gauge measurement
Portable Internal Combustion Tamping Machine
