Bottle cap molding machine

Brief introduction of bottle cap molding machine

Plastic bottle cap compression molding machine adopts continuous compression molding technology, which is suitable for higher capacity, lower unit cost and higher quality plastic bottle caps. The heating temperature of the bottle cap compression molding machine is lower than 180°C, which is much lower than that of the traditional injection molding machine and the temperature of the molding machine is above 200°C

Compared with injection molding machines and other plastic bottle cap compression molding machine manufacturers, Kaipu plastic bottle cap compression molding machine has the following characteristicsadvantage:A. Energy savingLess energy consumption, with an overall energy saving of up to 45% per cap. Because plastic bottle cap compression molding machines require lower heating temperatures, this means lower energy consumption for both heating and cooling.B. High specific gravity, small shrinkageThe same molding pressure, lower molding temperature can get higher density. In addition, the smaller temperature difference between heating and cooling results in less shrinkage of the cap.C. Quick color changeThere is no hot runner, only the extruder and the separate cold die contacting the material.D. Shorter cycle times (2 seconds) and therefore higher productivityDue to the lower extrusion temperature, the cap cools faster in the cold-feed die, resulting in shorter cycle times and thus higher throughput.E. Convenient and flexible maintenanceIndependent mold, more convenient mold change, only hand tools, no crane.F. Less material waste: The cost per cap is greatly reduced.