Factory sale 82MM 4D red blue white car front and rear tail logo LED logo light cold glow badge logo light Products from Ganzhou Yanyi Yanrui Trade Co., Ltd.

Product Details

place of origin; place of origin:	Guangdong, China	Warranty:	3 months
car model:	BMW	power supply:	DC12V+/-10%
year:	common	product name:	4D Logo LED Light
Voltage:	12(V)	Light color:	red blue white
port:	Shenzhen, Shanghai, Ningbo	current:	0.3 (one)
payment terms:	L/C,Western Union,D/P,D/A,T/T,MoneyGram	Wiring length:	0.6 meters
Supply capacity:	10000 sets per month	Model:	common
pack:	color box	Minimum order quantity:	10
size:	82MM	model:	YBP01
strength:	2(W)	Auto Parts:	common

Product Description

Specification

thing	value
place of origin; place of origin	China
Warranty	1 month
car model	BMW
Voltage	12
type	taillight
product name	4D Logo LED Light
light color	red blue white
power supply	DC12V+/-10%
Wiring length	0.6 meters
strength	2(W)
Voltage	12(V)
current	0.3 (one)
size	82MM
Minimum order quantity	10
pack	color box

Installation Precautions:

【Tools prepared before installation】
Please have the following tools ready: 1. Flat head screwdriver 2. Phillips screwdriver 3. Insulation tape 4. Towel 5. Pliers

1. First, lay a towel next to the car logo in the trunk, and use a flat-blade screwdriver to pry the car logo. towel is
Prevent scratching the body.
2. Pay attention to tear off the double-sided tape on the body first, and use moderate force when prying, not too hard
Violence, little by little, slowly pry open, wipe off the double-sided tape on the car logo and body.
3. Use a Phillips screwdriver to remove the bulkhead from the trunk. Note that there are clips in some places. Be careful
The various lines can be seen when the baffle is removed.
4. Now install the car marker lights. The power cord of the car logo light passes through one of the car logo positioning holes,
Penetrate it into the compartment. Tear off the single-sided adhesive on the back of the car logo light and paste the car logo light
Stick to the body while pulling the thread. Tight.
5. Now that the beacon lights are installed, connect the power. Car logo lights should be connected to power
Rear license plate lights, so that when the night lights are on, the car logo lights will also turn on at the same time
Time to find the power connector for the rear license plate light.
6. Unplug the plug first, peel a hole on the positive and negative poles to expose the wire core, and connect the wires according to the regulations
Turn red to red, black to black, don't forget to wrap it with insulating tape, and finally plug it back in! Reinstall boot
Lid bezel.
feature:
1. The appearance of this product is the same as the original car logo. Installed on the car logo
The trunk can directly replace the original car logo. The special vacuum plating technology it adopts can not only
Guarantees the same gloss as the original car logo, while also ensuring high light transmittance and uniform brightness.
2. Adopt high-quality LED light group, which has the characteristics of high brightness and long service life, especially
Waterproof and dustproof design to ensure long-term use.
3. This product is specially designed for car modification enthusiasts. When the beacon lights are off during the day, no
Different from the original car logo. When the license plate light is turned on at night, the LED car logo light will also be on
up, make the car logo dazzling in the dark, with a sense of future technology, showing your noble blood
car.
4. The inner LED light adopts special waterproof and dustproof design! LED lights have a lifespan of up to 100,000 hours.
5. Using high-quality car-specific double-sided tape, strong adhesion, durable!

More from Ganzhou Yanyi Yanrui Trade Co., Ltd.