COKOAIAI New Design 80W 2 IN 1 100*100cm All Metal CNC and Laser Control Laser Engraving Machine with Mobile App

The latest 5.5W laser power fixed focus laser with 0.15mm ultra-fine laser focus. it
Combining precision engraving and high-energy cutting. It can cut wood and acrylic up to 12mm thick, engrave painted stainless steel, ceramic and stone.

2. New eye protection design:
Laser filter shields filter 98% of UV rays that hit the eyes, you and those around you
Laser engraving can be viewed without goggles. The cover also prevents animals from grabbing the laser spot.

3. Fast focus design:
The S6 combines a fixed focus laser with a sliding design. You just need to slide the laser and tighten the screw and you're done
Focus.

4. Sturdy and fast assembly structure design:
The all-metal structure design makes the machine stronger and improves the engraving precision. The entire structure is designed for quick installation, which usually takes 10-20 minutes to complete
Install.

5. Wide compatibility:
The machine can be used with various engraving software such as LaserGRBL, LightBurn, Benbox,
GrblController, LiteFire, support PWM mode engraving, support Windows system, engraving files support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.

6. Square foot axis:
The XY axes contain precise tick marks, allowing you to measure the size of engraved objects. 410x420mm large engraving area to meet various engraving needs.

7. Safety design:
There is a power switch on the machine for emergency power off. Fixed holes are reserved on the four feet and the fuselage for fixing the machine and the data cable.

notes:
1. For detailed machine description, please refer to the manual for parameter setting.
2. When operating the laser engraving machine, please install the laser protective cover. If not installed, goggles will be required.
3. Do not touch the laser transmitter with your hands, otherwise it may burn your hands.
4. Please avoid strong impact on the machine.
5. Children under the age of 14 are not allowed to use this product, and children over the age of 14 need adult supervision.
6. The light engraving machine cannot be directly applied to any specular reflection object, otherwise it may cause injury to the operator or burn the laser.