Drip Irrigation System Design Gravity Drip Irrigation T Drip Tape in Agriculture

 Drip tape with integral flat emitter inside

1. The thickness of the drip irrigation belt varies from 0.15-0.8 mm, and the drip irrigation belt is used to irrigate open field crops - especially corn, vegetables, sugar cane and tomatoes.
2. The water channel is large and the transmitter is not easy to be blocked.
3. Anti-ultraviolet. Tolerates standard nutrients used in agriculture.
4. Made of original materials and advanced machines and technologies, it has good anti-corrosion and anti-aging properties.
5. The injection-molded dripper structure ensures excellent dripper uniformity and extremely low CV.

1. Has superior CV and excellent uniformity.
2. The new labyrinth channel has good blocking resistance.
3. Good decompression and longer laying length.
4. Made of high-quality materials and advanced technology, better anti-corrosion and anti-aging.
5. Contains Emitter extrusion molding, light weight, reel packaging, easy to transport.
6. The transmitter is designed to be clogging resistant, with a large flow path size and the largest crossover setup in the global industry.

Option one for large coils: Mount the drip tape reel on the bracket at the end of the row, tie
Stand on the ground and pull the drip tape closer to the ground.
step 1: Install drip irrigation zones or control valves, including remote valves or battery powered controls, filters, pressure regulators, and pipe adapters that connect to PVC or polyethylene pipes. We strongly recommend using a 10 to 15 PSI pressure regulator.
Step 2: Route main branch pipes or supply lines, PVC pipes or polyethylene pipes perpendicular to the row.
Step 3: Places the drip tape at the selected layout or spacing (see the two suggested options above).
Spacing suggestion: Arrange the drip irrigation tape in the center of the vegetable row, one row per row,
If the bed is less than 2 feet wide, draw a line between each row.