Multi-function wet and dry grinder for small grains Commercial powder grinding machine

Installation

The machine should be placed securely, and adjust the V-belt elastic appropriately, coaxial concentricity, the combination of machines should work separately.
Check the electric wires and power switch to ensure safety when the machine works.
The spindle of the machine should be oriented in the direction indicated by the arrow.
Before starting, please check whether all parts of the bolts are tightened. If there is abnormal sound after startup. You should stop the machine and eliminate the trouble before restarting.
It is strictly prohibited to open the cover and put hands into the feed port when the machine is working.
Open the feed inserts slowly, adjust the handle to grind the materials accrording to the required degree of thickness, and tighten the hand wheel lock.
When grinding into thick liquid, please inject appropriate amount of water into the hopper.
If the thickness of the primary processing of materials can not meet the requirements, please repeat grinding.
When the grinding plate is changed, the holes of the grinding plate, the roller (or grinding block)and the body should be aligned,tightening the bolts to avoid coaxiality of more than 0.5mm.
Maintenance
After finishing, the machine should promptly remove residual material, and check the machine's condition, if the machine damaged,you should repair it in time and keep the machine in the good condition.
Machine bearings should always be cleaned, filling butter. Motor bearings should be cleaned every six months, filling butter.
The machine should be stored in ventilated and dry place. Keep it in order to prevent rust.